Skip to content
Call (828) 388-9209Licensed, bonded & insured

Countertop Refinishing & Resurfacing in Hendersonville, NC

Henderson Custom Countertops handles countertop refinishing & resurfacing in Hendersonville, NC, resealing tired countertops and restoring sheen and stain protection without a tear-out. If refinishing will not solve the problem, we say so before you spend anything.

  • No-cost measure at your home
  • You approve the slab
  • Itemized written quote

Price my countertops

About our refinishing and resurfacing

Refinishing renews a sound countertop instead of replacing it. We hone out etches and scratches, re-polish dull stone and strip and reseal a top that has started to soak up water, usually in a single day and without touching your cabinets.

The first question we answer is whether your counters are worth restoring. Stone that is structurally sound almost always is, and stone that is cracked through is not. We visit homes in Hendersonville, Flat Rock and out toward Mills River.

Why Henderson Custom Countertops

What You Can Hold Us To

Whoever measures your cabinets is the person accountable for the finished top.

On-site measureEvery wall and cabinet measured and checked for level before cutting
Your slabYou approve the exact slab and where each seam lands
Written scopeMaterial, edge, cutouts and backsplash listed line by line
Licensed, bonded & insuredProof of insurance on request; a COI and W-9 with every commercial bid

Refinishing, resurfacing or replacing: which one fits

Refinishing is the right call when the stone is sound but the surface is worn, and replacement is right when the stone itself has failed. The three options sit on a scale from light to heavy, and the cheapest one that solves your problem is the one to choose.

Refinishing works on the existing surface. It means honing, polishing and resealing, and it suits natural stone that has lost its shine, picked up etch marks or stopped repelling water.

Resurfacing means applying a new layer over an old top. It is a coating approach, aimed at dated or damaged tops where the cabinets are staying. We assess it case by case, and we are candid that a coating is not stone. For a top you expect to live with for fifteen years, a new slab is usually the better long-term value.

Replacement is the heaviest option. It is the answer when a top is cracked through, when several seams are failing, or when you simply want a different material.

We will walk the top with you, run a few tests, and tell you which category it falls in. Sometimes the answer is a light refresh and nothing more.

You can do a quick test before we visit. Drip a little water on the counter and look across the surface toward a window. Dark spots that linger point to a sealing problem, a hazy dull look points to wear or film, and a crack you can catch with a fingernail points toward repair or replacement rather than refinishing.

What refinishing brings back

Refinishing restores the surface features that wear first: sheen, smoothness and stain resistance. Each has a specific cause, and each has a specific fix.

Etching is the dull, pale mark left behind when something sour, like lemon juice, vinegar or wine, eats into the calcite of marble and limestone. Etching is a chemical change to the surface rather than a stain, so no cleaner removes it and the fix is mechanical. We hone the area level and polish it back to an even finish.

Scratches are removed the same way. Fine surface marks come out with abrasives, and the work is blended across a wider area so the repaired patch does not look like a patch.

Dull granite has usually lost its shine in one of two ways: the polish has worn through years of use, or a film of soap and hard-water minerals has built up on it. We clean the film off first, then re-polish with progressively finer diamond pads until the gloss returns.

A top that drinks water has lost its sealer. The signs are these:

  • Dark spots. Water darkens the stone and stays dark for many minutes instead of beading.
  • Ring marks. A glass or bottle leaves a stain that does not wipe away.
  • Oil absorption. Cooking oil near the range leaves a shadow in the stone.

For these we clean the stone thoroughly, let it dry, and apply a penetrating sealer that sinks into the stone and leaves the look of the surface alone.

Quartzite counter with gold and grey veining book-matched so the pattern mirrors across the seam

What refinishing costs in Henderson County

Refinishing costs far less than replacement, and most jobs land at a few hundred dollars. A reseal of a typical kitchen is commonly estimated at roughly $150 to $350, while a full hone-and-polish of a kitchen's worth of stone is commonly estimated at about $10 to $25 per square foot.

  • Reseal natural stone. Commonly estimated at $150 to $350 for a kitchen, and it protects the top for one to three years, depending on the stone and the use.
  • Hone and polish refresh. Commonly estimated at $10 to $25 per square foot, depending on how worn the surface is.
  • Etch and stain restoration. Commonly estimated at $200 to $600 for localized work.
  • Finish change. Converting a polished top to honed, or a honed one to polished, is priced by the square foot as a refresh.

The main cost drivers are the stone type, how deep the damage goes and how large the area is. A hard granite takes longer to re-polish than a soft marble, and a heavily etched island takes longer than a lightly dulled run.

Compare that against replacement, which means a new slab, fabrication, a tear-out and an install. If your stone is sound, refinishing can be a small share of that cost.

Every figure here is an estimate, and the written quote after your free surface assessment sets the final price.

Timing helps too. Refinishing happens in your kitchen, so plan to stay out of the work area for the day and keep water off a freshly sealed top for as long as the sealer maker specifies.

Honed or polished: choosing the finish

A polished finish is glossy and reflective, while a honed finish is smooth and soft with little shine. Both are real finishes, and refinishing lets you move between them.

Polished stone shows off color and veining, which is why most granite and quartzite ships that way. The trade-off is that it shows fingerprints and water spots more readily, and on marble a polished face shows etching quickly.

Honed stone hides marks better and has a quieter, more natural look. It is a popular choice on marble and soapstone and a good way to update a dated polished top without replacing the stone. The surface can feel slightly more porous, so a good sealer matters.

One note on engineered quartz: it is non-porous, so it never needs sealing, and its factory finish cannot be re-polished the way natural stone can. Minor marks can be buffed, but if a quartz top is badly damaged, repair or replacement is the realistic route, and we will tell you that plainly.

If you cannot decide, we bring a few honed and polished samples of your own stone type to the visit so you can compare them under your own kitchen light. Mention any plans for the cabinets or backsplash as well, since a refinish is a natural moment to coordinate that work.

Dark speckled granite counter with a stainless gas cooktop set into it, above white oak cabinets

What each material needs

A refinish is chosen by stone type, because each material wears and restores differently. Here is how we approach the common ones.

Granite

Re-polished through finer and finer diamond pads and resealed, and a simple puddle test tells you when sealing is next due.

Marble

Etches and scratches are honed out, and the face is left honed or polished to your preference, then sealed.

Quartzite

Very hard, so it holds its finish a long time, and a reseal after a few years is often all it asks for.

Soapstone

Light sanding removes scratches, and an oil or wax finish deepens the color and evens the surface.

Engineered quartz

Needs no sealer, and only light buffing of minor marks is possible, so deep damage points to repair or replacement.

Stone, Edges and Finishes

Start to finish

From Assessment to Restored Surface

You approve the finish and the estimated price before any abrasive touches the stone.

  1. Assess

    We test the surface, check it for cracks and decide whether refinishing, repair or replacement fits.

  2. Clean and prepare

    Soap film and old sealer are cleaned off, and nearby cabinets and walls are masked.

  3. Hone and polish

    Abrasives step up from coarse to fine until etches and scratches are gone and the sheen is even.

  4. Seal and show you

    Natural stone is resealed, and we show you how to run the water test yourself.

Straight answers

Refinishing and Resurfacing: Questions We Hear

Will dull granite get its shine back?

In most cases it will. We clean away soap and mineral film, then re-polish with progressively finer diamond pads and reseal. The gloss comes back because the stone itself is unchanged underneath.

How often should natural stone be resealed?

When water darkens the stone and lingers, not by the calendar. Many tops go one to three years between sealings, and denser stone can go longer.

Does a quartz top ever need sealing or refinishing?

No sealing, since it is non-porous. Refinishing is limited too, because the factory polish is not meant to be redone, though light marks can be buffed.

Can the finish go from polished to honed?

Yes. Honing takes a polished surface down to satin or matte, and a honed one can be brought back up to gloss. We bring samples so you can see both.

When is refinishing the smarter choice over a new top?

If the stone is sound and you still like the look of it, refinishing wins, because it costs far less and disrupts the house less. Replacement is better when the stone is cracked, failing or the wrong material for you.

How long does refinishing take?

Sealing alone is a short visit. Honing and polishing every counter in a kitchen generally fills one working day, give or take the square footage and how worn the stone is.

How much does refinishing cost?

A reseal is typically estimated at roughly $150 to $350, and a hone and polish at about $10 to $25 per square foot. Your written quote after the free assessment sets the final price.

Can you resurface my laminate counters?

We assess it first. A coating can freshen a dated laminate top, but it is not stone and will wear differently, so for a lasting upgrade most people are better served by new stone.

No-cost site visit

Ready to Talk About Refinishing?

We measure homes and businesses across Henderson County. Builders and businesses can send drawings for a bid.

Call (828) 388-9209

Licensed, bonded & insured. Calls only, we do not receive text messages.

Call (828) 388-9209Licensed, bonded & insured