Henderson Custom Countertops is a leading Henderson County fabricator of medical and dental office countertops in Hendersonville, NC, specializing in exam room tops, dental operatory counters and sterilization room runs. We offer solid surface and engineered quartz for rooms wiped down with hospital disinfectants all day.
Our team provides integral solid surface sinks and tightly sealed sink joins, delivering work surfaces with fewer places for grime to collect, for both residential and commercial projects. We lay out the seams on shop drawings that the practice or its GC approves, keeping each joint clear of sinks and wet zones, and a sample of the chosen color is signed off before our own shop cuts anything. Licensed, bonded and insured, we work as the countertop subcontractor on medical suite build-outs and practice remodels alike.
From the backsplash behind a lab sink to a lowered check-in top at the front desk, our team handles every detail. Serving Hendersonville, Fletcher, Laurel Park and Flat Rock, we schedule the dusty and noisy steps for evenings and the days your office is closed.
Why Henderson Custom Countertops
Whoever measures your cabinets is the person accountable for the finished top.
Exam rooms and dental operatories in Henderson County need counters that take a disinfectant wipe between every patient without clouding, etching or opening up at the seams. That rules some beautiful stones out and makes two materials the default.
Solid surface blends alumina trihydrate with acrylic or polyester resin and is used most often for seamless countertops. Joints are glued with color matched adhesive so they nearly disappear, and the same material can be formed into an integral sink, so there is no rim for residue to hide under.
Quartz surfaces are about 93 percent crushed stone held in resin. They are non porous and harder than many natural stones, which suits an operatory where instruments get set down all day.
Granite can work in a consult room or at the front desk. Marble does not belong where disinfectants are used: it is calcium carbonate, and acids etch it. In an operatory the counter usually runs along the side and rear walls with a hand sink in it, and the dentist or hygienist reaches it from a stool. We template on the installed casework so the top lands exactly on the cabinet line and the sink cutout matches the bowl the plumber will connect.
Solid surface and engineered quartz take the disinfectants a practice uses every day; marble does not. CDC guidance on environmental cleaning in health care names EPA registered detergent and disinfectant products for surface cleaning, and lists product and surface compatibility among the main criteria for choosing one. So the counter and the chemical should be chosen together.
The manufacturer data is specific. In DuPont's published tests, drops of each product sat under a glass cover on the surface for 16 hours before being washed off.
That is why we ask for the practice's cleaning product list before we recommend a color. A dark solid surface that shows quat haze may be the wrong pick for a busy hygiene room even though the material itself is sound.
A sterilization area or in-office lab needs a long, uninterrupted counter with a deep sink, room for an autoclave and a clean side kept separate from the dirty side by the layout. An autoclave sterilizes instruments with pressurized steam, so the counter under it takes warmth and the occasional drip every working day.
We cut and set the sinks; a licensed plumber makes every water and drain connection, and your equipment supplier places the autoclave.
Reception and check-out counters in a medical or dental office have to meet the 2010 ADA Standards, and the numbers are specific. A service counter needs an accessible portion no higher than 36 inches above the floor, at least 36 inches long where a wheelchair user pulls up alongside, or at least 30 inches long with knee and toe space where they pull up facing it.
Your architect sets the heights on the drawings. We build to them, and we template the finished desk framing before cutting so a stepped transaction top meets the upper counter in a clean line. Reception is also where a practice most often wants a showpiece, and a natural granite or quartzite ledge works well there because it stays outside the clinical cleaning routine.
Countertops for a medical or dental office are typically estimated at roughly $10,000 to $100,000 per project, according to the commercial ticket ranges in our trade research, with the number of rooms and the material doing most of the moving. A single dental suite sits near the bottom of that band; a multi-provider clinic with a lab and sterilization center sits higher.
These figures are estimates and are subject to change with material costs and the final drawings; the written bid sets the price. Send the drawings and the finish schedule, and tell us which rooms must stay open during the work.
Most practice remodels in Hendersonville happen while patients are still being seen, so the work is planned around the schedule rather than the other way round. After-hours installs keep a practice open.
Medical office work here clusters around the city's two hospitals, AdventHealth Hendersonville and Pardee Hospital, with newer suites going up toward Fletcher near I-26. Those buildings are named here as places, not clients. A suite in a larger medical office building often has building rules on noise hours and elevator use, and we fit the install nights to them.
Start to finish
Nothing is cut until you have approved the slab and the seam layout.
We measure the cabinets, check them for level, look at the carry path in, and talk through material, edge and sink.
You choose the slab, and we show you where the seams and the veining will fall before anything is cut.
The stone is cut wet, edged and polished in the shop, with openings cut to the sink and cooktop you picked.
We carry it in, set it, seal natural stone that needs it, and walk the finished counters with you.
Also from our shop
Straight answers
Solid surface or engineered quartz. Both are non porous and take common clinical disinfectants, and solid surface can carry an integral sink with no rim. Marble is a poor fit because acids etch it.
Quaternary ammonium wipes do not harm solid surface in the manufacturer's testing, but their residue can build up into a haze that hot, soapy water removes. Send us your product list and we will match the material and color to it.
Yes. We work evenings and closed days, a few rooms at a time, and the dusty cutting stays in the shop.
Yes. We build to the heights on your architect's drawings, including a transaction section no higher than 36 inches, and template the desk framing first so the stepped top fits cleanly.
A licensed plumber. We cut the openings and set or form the sinks, and the plumber makes the water and drain connections.
Yes. Send the drawings and finish schedule and we return a line-item bid by room type, then confirm every size on site before fabrication.
Yes. A certificate of insurance and a W-9 come with the bid package, and additional insured wording for the landlord or GC is handled at award.
We measure homes and businesses across Henderson County. Builders and businesses can send drawings for a bid.
Licensed, bonded & insured. Calls only, we do not receive text messages.
